Price posts go stale fast, so treat this as a current picture of Greenville-Spartanburg work from a company that stains here every week, not a coupon and not a national average with a local keyword pasted in. Material costs, labor, and prep standards all moved in the last few years. Here is what professional staining actually runs in the Upstate right now, and why.

Fence staining here often runs about $0.85 to $1.50 per square foot of surface, depending on style, height, one side or both, whether the wood needs a wash, and access. Notice the unit: square feet of surface, not linear feet of fence. A 150-foot privacy fence at 6 feet tall is 900 square feet per side. One side at those rates lands roughly $765 to $1,350. Both sides doubles the surface, and a wash for greyed wood adds to it.

What pushes a fence to the low end: newer wood in good shape, one side, flat ground, water and power on site, standard penetrating stain. What pushes it high: greyed wood that needs washing, both sides, picket or shadowbox style with all its edges, slopes, tight access, no spigot, no outlet. No electricity on site is about a $100 generator fee. None of this is padding. It is the actual labor and logistics of the job.

Deck staining typically runs $2.00 to $5.00 per square foot for standard horizontal decking, with rails and stairs counted in the scope when they are part of the job. A simple 300-square-foot deck might run $600 to $1,500. A 600-square-foot deck with a full rail system and stairs can run $1,200 to $3,000 or more. Heavy stripping and sanding of an old film finish sits at the top of the range because it is genuinely days of labor.

Why does a deck cost more per square foot than a fence? Horizontal surfaces hold water and take direct UV, so prep has to be better and product has to be tougher. Decks get walked on, so the finish has to survive abrasion. Rails and balusters are detail work. And an old peeling deck often needs stripping and sanding, not just a wash. You are buying more hours and more chemistry per square foot.

Prep is where quotes secretly differ. A real prep line can include washing, a wood brightener, stripping failed finish, sanding, and killing mildew. A cheap quote often includes none of it, just stain over whatever is there. Stain over dirt, mildew, or a peeling film fails early, and the failure looks like the stain’s fault when it was really the prep. When you compare quotes, compare the prep steps line by line, not just the bottom number.

Older articles floating $0.60 to $1.00 per square foot for fences were chasing a different year, different material costs, and often skipped prep entirely. If a number only works when nobody washes the wood, it is not a real number. The same goes for anyone quoting a fence by the linear foot without asking the height, the style, or which sides. Those questions are the price.

This is why we quote flat-rate. We look at the fence or deck, ask the access questions, meter the wood if needed, and give you one firm number before work starts. No hourly billing that grows when a board fights back, no surprise add-ons at the end. The quote you sign is the price you pay, and the scope is written down so both sides know what "done" means.

Two more things that belong in a pricing guide. Every job carries a 12-month workmanship warranty, and the stain manufacturers back their products up to 3 years when you register the warranty. And if the total stings, eligible customers can finance with 0% APR up to 24 months through Wisetack (offers range from 0 to 35.9% APR based on creditworthiness). Protecting the wood now is almost always cheaper than restoring it later.

Get your number: call or text 864-800-8275 or send the estimate form with a few photos. Free estimates, typically within one business day. We are based in Duncan and work across Greenville, Spartanburg, Greer, Reidville, Lyman, Simpsonville, and Mauldin.